Parameter
| Model |
XSM-50 |
XSM-80 |
XSM-110 |
XSM-160 |
| Total volume of mixing chamber(L) |
60 |
120 |
165 |
240 |
| Working volume of mixing chamber(L) |
50L |
80 |
110 |
160 |
| Driving motor power(KW) |
90 |
185 |
280 |
400 |
| Front rotational speed of the rotor(RPM) |
40 |
40 |
40 |
40 |
| Speed ratio of rotors |
1:1.2 |
1:1.2 |
1:1.2 |
1:1.2 |
| Consumption of cooling water(M3/hour) |
20 |
25 |
35 |
50 |
| Weight (Ton) |
10 |
16.5 |
22.5 |
39 |
Mixing chamber
The mixing chamber adopts drilling type cooling, which has good cooling effect. Hard alloy surfacing in the mixing chamber, alloy thickness: 4-5mm,
Hardness: ≥45HRc, the working surface is hard chromium plated, the thickness of the chromium layer is 0.10-0.15mm.
The main components of the mixer include the pressing device, feeding device, internal mixing device, unloading device, and locking device. Each component plays a crucial role in the mixing process, ensuring uniformity and quality in the final rubber compound.
The mixer is powered by a main motor and reducer, which are connected by an elastic coupling for smooth and efficient power transmission. The reducer is further connected to the mixing device via a pin coupling, ensuring a secure and reliable connection during operation. This design allows for optimal energy transfer and minimal loss during the mixing process.
In addition to the mechanical components, the mixer also features a hydraulic system, further enhancing its performance and operational efficiency. The hydraulic system provides additional power and control, allowing for precise adjustments and seamless operation of the mixer.
Rotor
Two-edge high-efficiency rotor, using cast rotor body, the rotor body is hollow, the inner cavity is cooled by water, the rotor
The top part of the peak and other parts are surfacing with hard alloy. The alloy thickness is 4-5mm. The other working parts are surfacing with cemented carbide.
Strength: 4-5mm, hardness: ≥45HRc. The entire working surface of the rotor is hard chromium plated with a thickness of 0.10-0.15mm.
Unloading and locking device
The discharge and locking device mainly consists of a discharge door, a double rack swing cylinder, a discharge door seat, etc.
This 80L Banbury Type Rubber Internal Mixer is an ideal choice for rubber processing facilities looking to streamline their operations and achieve consistent, high-quality results. Its robust construction, advanced components, and reliable performance make it a valuable asset for any manufacturing environment.
Whether you're working with natural rubber, synthetic rubber, or any other type of rubber compound, this mixer is designed to meet the demands of modern production processes. With its comprehensive set of features and capabilities, the 80L Banbury Type Rubber Internal Mixer is a superior choice for achieving efficient and reliable rubber mixing.
