0102030405
double screw extruding and calendering machine
Parameter
| Model | T1B |
| Capacity | max 1T/hour |
| Cooperate with kneader | 75L-110L |
| Rubber sheet width | 400-500mm |
| Roll gap | 3-4mm（sheet thickness is 6mm） |
| Roll diameter | 250mm |
| Roll length | 500mm |
| Roll speed | 2-22rpm |
| Rubber sheeting machine power | 18.5KW |
| Screw speed | 2-22rpm |
| Extruding power | 18.5KW |
description
1. The feeding effect is good and the rubber sheet are evenly distributed, which greatly reduces the work intensity of workers and reduces investment costs. Compared with old models, it reduces labor intensity and investment costs.
2. Double roller hydraulic adjustment device, fast operation, convenient opening and cleaning of the machine head, saving time and effort.
3. The space between the screw and the screw is small, the material is stored in a small space, the extrusion pressure is small, energy saving, and no rubber is burned.
4. The electronic control system uses frequency converters to improve resource utilization, safety and energy saving.
5. Using a special reduction gearbox for hard-tooth surface extruders, it has low noise and long service life.
Based on two screws rotating opposite each other, the main screw and the auxiliary screw. The main screw is located in the center of the barrel and is responsible for promoting the material, while the auxiliary screw is located on the side of the main screw and interacts with the main screw to play the role of mixing and compression. At work, the material enters the feed area of the twin-screw extruder from the extruder bin. The main screw pushes the material from the feed area to the area of the auxiliary screw, and then the material is pushed back by the auxiliary screw. In this process, the additional operation from the auxiliary screw makes the material fully in contact with each position of the machine part, so that the material is more evenly mixed.
description2