RUBBER KNEADER

Short Description:

This Rubber Dispersion Kneader is mainly used for plasticizing and mixing of natural rubber, synthetic rubber, reclaimed rubber and plastics, foaming plastics, and used in mixing of various the degree materials.

Send email to us

Product Detail

Product Tags

Our advantage

1.Hard wearing rotor/mixing chamber：12 layers chromplating and hard alloy welding for hsa>70 rubber

2.ML series hard gear reducer : low noise high transmission efficiency

3.PLC control panel

4.Efficient heating&cooling

Technical parameter:

Parameter/model		X(S)N-3	X(S)N-10×32	X(S)N-20×32	X(S)N-35×32	X(S)N-55×32
Total volume		8	25	45	80	125
Working volume		3	10	20	35	55
Motor power		7.5	18.5	37	55	75
Tilting motor power		0.55	1.5	1.5	2.2	2.2
Tilting angle (°)		140	140	140	140	140
Rotor speed (r/min)		32/24.5	32/25	32/26.5	32/24.5	32/26
Pressure of compressed air		0.7-0.9	0.6-0.8	0.6-0.8	0.6-0.8	0.6-0.8
Capacity of compressed air (m/min)		≥0.3	≥0.5	≥0.7	≥0.9	≥1.0
Pressure of cooling water for rubber (MPa)		0.2-0.4	0.2-0.4	0.2-0.4	0.3-0.4	0.3-0.4
Pressure of steam for plastic (MPa)		0.5-0.8	0.5-0.8	0.5-0.8	0.5-0.8	0.5-0.8
Size (mm)	Length	1670	2380	2355	3200	3360
	Width	834	1353	1750	1900	1950
	Height	1850	2113	2435	2950	3050
Weight (kg)		1038	3000	4437	6500	7850

Parameter/model		X(S)N-75×32	X(S)N-95×32	X(S)N-110×30	X(S)N-150×30	X(S)N-200×30
Total volume		175	215	250	325	440
Working volume		75	95	110	150	200
Motor power		110	132	185	220	280
Tilting motor power		4.0	5.5	5.5	11	11
Tilting angle (°)		140	130	140	140	140
Rotor speed (r/min)		32/26	32/26	30/24.5	30/24.5	30/24.5
Pressure of compressed air		0.6-0.8	0.6-0.8	0.6-0.8	0.6-0.8	0.6-0.8
Capacity of compressed air (m/min)		≥1.3	≥1.5	≥1.6	≥2.0	≥2.0
Pressure of cooling water for rubber (MPa)		0.3-0.4	0.3-0.4	0.3-0.4	0.3-0.4	0.3-0.4
Pressure of steam for plastic (MPa)		0.5-0.8	0.5-0.8	0.5-0.8	0.5-0.8	0.5-0.8
Size (mm)	Length	3760	3860	4075	4200	4520
	Width	2280	2320	2712	3300	3400
	Height	3115	3320	3580	3900	4215
Weight (kg)		10230	11800	14200	19500	22500