RUBBER KNEADER

Takaitaccen Bayani:

Wannan Rubber Dispersion Kneader ana amfani da shi ne don yin robobi da haɗawa da roba na halitta, robar roba, roba da robobi da aka dawo da su, robobin kumfa, ana amfani da su wajen haɗa kayan digiri daban-daban.

Aika mana imel

Cikakken Bayani

Tags samfurin

Amfaninmu

1.Hard sanye da na'ura mai juyi / hadawa dakin: 12 yadudduka chromplating da wuya gami waldi ga hsa> 70 roba

2.ML jerin hard gear reducer: ƙananan amo high watsa yadda ya dace

3.PLC kula da panel

4.Efficient dumama & sanyaya

Ma'aunin fasaha:

Siga/samfuri		X(S) N-3	X(S) N-10×32	X(S) N-20×32	X(S) N-35×32	X(S) N-55×32
Jimlar girma		8	25	45	80	125
Ƙarar aiki		3	10	20	35	55
Ƙarfin mota		7.5	18.5	37	55	75
Karfin motsin motsi		0.55	1.5	1.5	2.2	2.2
Kwangilar karkata (°)		140	140	140	140	140
Gudun rotor (r/min)		32/24.5	32/25	32/26.5	32/24.5	32/26
Matsi na matsa lamba		0.7-0.9	0.6-0.8	0.6-0.8	0.6-0.8	0.6-0.8
Ƙarfin matsewar iska (m/min)		≥0.3	≥0.5	≥0.7	≥0.9	≥1.0
Matsin ruwan sanyaya don roba (MPa)		0.2-0.4	0.2-0.4	0.2-0.4	0.3-0.4	0.3-0.4
Matsin tururi don filastik (MPa)		0.5-0.8	0.5-0.8	0.5-0.8	0.5-0.8	0.5-0.8
Girman (mm)	Tsawon	1670	2380	2355	3200	3360
	Nisa	834	1353	1750	1900	1950
	Tsayi	1850	2113	2435	2950	3050
Nauyi (kg)		1038	3000	4437	6500	7850

Siga/samfuri		X(S) N-75×32	X(S) N-95×32	X(S) N-110×30	X(S) N-150×30	X(S) N-200×30
Jimlar girma		175	215	250	325	440
Ƙarar aiki		75	95	110	150	200
Ƙarfin mota		110	132	185	220	280
Karfin motsin motsi		4.0	5.5	5.5	11	11
Kwangilar karkata (°)		140	130	140	140	140
Gudun rotor (r/min)		32/26	32/26	30/24.5	30/24.5	30/24.5
Matsi na matsa lamba		0.6-0.8	0.6-0.8	0.6-0.8	0.6-0.8	0.6-0.8
Ƙarfin matsewar iska (m/min)		≥1.3	≥1.5	≥1.6	≥2.0	≥2.0
Matsin ruwan sanyaya don roba (MPa)		0.3-0.4	0.3-0.4	0.3-0.4	0.3-0.4	0.3-0.4
Matsin tururi don filastik (MPa)		0.5-0.8	0.5-0.8	0.5-0.8	0.5-0.8	0.5-0.8
Girman (mm)	Tsawon	3760	3860	4075	4200	4520
	Nisa	2280	2320	2712	3300	3400
	Tsayi	3115	3320	3580	3900	4215
Nauyi (kg)		10230	11800	14200	19500	22500