Paramèter
| Parameter/model | X(S)N-3 | X(S)N-10×32 | X(S)N-20×32 | X(S)N-35×32 | X(S)N-55×32 | |
| Volume total | 8 | 25 | 45 | 80 | 125 | |
| Volume kerja | 3 | 10 | 20 | 35 | 55 | |
| daya motor | 7.5 | 18.5 | 37 | 55 | 75 | |
| Daya motor miring | 0.55 | 1.5 | 1.5 | 2.2 | 2.2 | |
| Sudut miring (°) | 140 | 140 | 140 | 140 | 140 | |
| Kacepetan rotor (r/min) | 32/24.5 | 32/25 | 32/26.5 | 32/24.5 | 32/26 | |
| Tekanan udara sing dikompres | 0.7-0.9 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | |
| Kapasitas udara tekan (m/min) | ≥0.3 | ≥0.5 | ≥0.7 | ≥0.9 | ≥1.0 | |
| Tekanan banyu pendingin kanggo karet (MPa) | 0.2-0.4 | 0.2-0.4 | 0.2-0.4 | 0.3-0.4 | 0.3-0.4 | |
| Tekanan uap plastik (MPa) | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | |
| Ukuran (mm) | dawa | 1670 | 2380 | 2355 | 3200 | 3360 |
| Jembar | 834 | 1353 | 1750 | 1900 | 1950 | |
| dhuwur | 1850 | 2113 | 2435 | 2950 | 3050 | |
| Bobot (kg) | 1038 | 3000 | 4437 | 6500 | 7850 | |
| Parameter/model | X(S)N-75×32 | X(S)N-95×32 | X(S)N-110×30 | X(S)N-150×30 | X(S)N-200×30 | |
| Volume total | 175 | 215 | 250 | 325 | 440 | |
| Volume kerja | 75 | 95 | 110 | 150 | 200 | |
| daya motor | 110 | 132 | 185 | 220 | 280 | |
| Daya motor miring | 4.0 | 5.5 | 5.5 | 11 | 11 | |
| Sudut miring (°) | 140 | 130 | 140 | 140 | 140 | |
| Kacepetan rotor (r/min) | 32/26 | 32/26 | 30/24.5 | 30/24.5 | 30/24.5 | |
| Tekanan udara sing dikompres | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | |
| Kapasitas udara tekan (m/min) | ≥1.3 | ≥1.5 | ≥1.6 | ≥2.0 | ≥2.0 | |
| Tekanan banyu pendingin kanggo karet (MPa) | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | |
| Tekanan uap plastik (MPa) | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | |
| Ukuran (mm) | dawa | 3760 | 3860 | 4075 | 4200 | 4520 |
| Jembar | 2280 | 2320 | 2712 | 3300 | 3400 | |
| dhuwur | 3115 | 3320 | 3580 | 3900 | 4215 | |
| Bobot (kg) | 10230 | 11800 | 14200 | 19500 | 22500 | |
Aplikasi:
Karet Dispersion Kneader iki utamané digunakake kanggo plasticizing lan nyawiji saka karet alam, karet sintetik, karet direklamasi lan plastik, plastik foaming, lan digunakake ing nyawiji saka macem-macem bahan gelar.
Fitur Konstruksi:
1. Kanthi kondisi lengkap, bahan dicampur utawa plastik ing tekanan tartamtu, suhu sing bisa dikontrol, sing ndadekake efisiensi produksi dhuwur lan entuk kualitas sing apik.
2. Sudut spiral lan liwat lapping dawa lading rotors saka desain cukup lan nggawe bahan kanggo buyar seragam
3. Karet Mixer lumahing ngendi kontak karo bahan kabeh dilapisi karo kromium hard lan polesan, kang karat-tahan lan nyandhang-tahan
4. Konstruksi jaket diadopsi ing bagean kneader karet sing permukaan kontak karo bahan kanggo entuk efek pemanasan banyu utawa uap sing apik lan cocog karo kabutuhan plastik lan teknologi pangolahan karet.gy.
