Parameter
|
Parameter/model |
X(S)N-3 |
X(S)N-10×32 |
X(S)N-20×32 |
X(S)N-35×32 |
X(S)N-55×32 |
|
|
Total volume |
8 |
25 |
45 |
80 |
125 |
|
|
Working volume |
3 |
10 |
20 |
35 |
55 |
|
|
Motor power |
7.5 |
18.5 |
37 |
55 |
75 |
|
|
Tilting motor power |
0.55 |
1.5 |
1.5 |
2.2 |
2.2 |
|
|
Tilting angle (°) |
140 |
140 |
140 |
140 |
140 |
|
|
Rotor speed (r/min) |
32/24.5 |
32/25 |
32/26.5 |
32/24.5 |
32/26 |
|
|
Pressure of compressed air |
0.7-0.9 |
0.6-0.8 |
0.6-0.8 |
0.6-0.8 |
0.6-0.8 |
|
|
Capacity of compressed air (m/min) |
≥0.3 |
≥0.5 |
≥0.7 |
≥0.9 |
≥1.0 |
|
|
Pressure of cooling water for rubber (MPa) |
0.2-0.4 |
0.2-0.4 |
0.2-0.4 |
0.3-0.4 |
0.3-0.4 |
|
|
Pressure of steam for plastic (MPa) |
0.5-0.8 |
0.5-0.8 |
0.5-0.8 |
0.5-0.8 |
0.5-0.8 |
|
|
Size (mm) |
Length |
1670 |
2380 |
2355 |
3200 |
3360 |
|
Width |
834 |
1353 |
1750 |
1900 |
1950 |
|
|
Height |
1850 |
2113 |
2435 |
2950 |
3050 |
|
|
Weight (kg) |
1038 |
3000 |
4437 |
6500 |
7850 |
|
|
Parameter/model |
X(S)N-75×32 |
X(S)N-95×32 |
X(S)N-110×30 |
X(S)N-150×30 |
X(S)N-200×30 |
|
|
Total volume |
175 |
215 |
250 |
325 |
440 |
|
|
Working volume |
75 |
95 |
110 |
150 |
200 |
|
|
Motor power |
110 |
132 |
185 |
220 |
280 |
|
|
Tilting motor power |
4.0 |
5.5 |
5.5 |
11 |
11 |
|
|
Tilting angle (°) |
140 |
130 |
140 |
140 |
140 |
|
|
Rotor speed (r/min) |
32/26 |
32/26 |
30/24.5 |
30/24.5 |
30/24.5 |
|
|
Pressure of compressed air |
0.6-0.8 |
0.6-0.8 |
0.6-0.8 |
0.6-0.8 |
0.6-0.8 |
|
|
Capacity of compressed air (m/min) |
≥1.3 |
≥1.5 |
≥1.6 |
≥2.0 |
≥2.0 |
|
|
Pressure of cooling water for rubber (MPa) |
0.3-0.4 |
0.3-0.4 |
0.3-0.4 |
0.3-0.4 |
0.3-0.4 |
|
|
Pressure of steam for plastic (MPa) |
0.5-0.8 |
0.5-0.8 |
0.5-0.8 |
0.5-0.8 |
0.5-0.8 |
|
|
Size (mm) |
Length |
3760 |
3860 |
4075 |
4200 |
4520 |
|
Width |
2280 |
2320 |
2712 |
3300 |
3400 |
|
|
Height |
3115 |
3320 |
3580 |
3900 |
4215 |
|
|
Weight (kg) |
10230 |
11800 |
14200 |
19500 |
22500 |
|
Application :
This Rubber Dispersion Kneader is mainly used for plasticizing and mixing of natural rubber, synthetic rubber, reclaimed rubber and plastics, foaming plastics, and used in mixing of various the degree materials.
Construction Features:
1. With completely condition, materials are mixed or plasticizing under certain pressure, controllable temperature, which makes high production efficiency and obtains excellent quality
2. Spiral angle and over lapping length of blades of the rotors are of reasonable design and make the materials to be dispersed uniformly
3. Rubber Mixer surface where is contacted with the materials are all plated with hard chromium and polished, which is corrosion-resistant and wear-resistant
4. Jacket construction is adopted in rubber kneader parts that surfaces contact with materials to achieve excellent water-cooling or steam heating effect and fit in with the needs of plastics and rubber processing technology.
