Siga
| Siga/samfuri | X(S) N-3 | X(S) N-10×32 | X(S) N-20×32 | X(S) N-35×32 | X(S) N-55×32 | |
| Jimlar girma | 8 | 25 | 45 | 80 | 125 | |
| Ƙarar aiki | 3 | 10 | 20 | 35 | 55 | |
| Ƙarfin mota | 7.5 | 18.5 | 37 | 55 | 75 | |
| Karfin motsin motsi | 0.55 | 1.5 | 1.5 | 2.2 | 2.2 | |
| Kwangilar karkata (°) | 140 | 140 | 140 | 140 | 140 | |
| Gudun rotor (r/min) | 32/24.5 | 32/25 | 32/26.5 | 32/24.5 | 32/26 | |
| Matsi na matsa lamba | 0.7-0.9 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | |
| Ƙarfin matsewar iska (m/min) | ≥0.3 | ≥0.5 | ≥0.7 | ≥0.9 | ≥1.0 | |
| Matsin ruwan sanyaya don roba (MPa) | 0.2-0.4 | 0.2-0.4 | 0.2-0.4 | 0.3-0.4 | 0.3-0.4 | |
| Matsin tururi don filastik (MPa) | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | |
| Girman (mm) | Tsawon | 1670 | 2380 | 2355 | 3200 | 3360 |
| Nisa | 834 | 1353 | 1750 | 1900 | 1950 | |
| Tsayi | 1850 | 2113 | 2435 | 2950 | 3050 | |
| Nauyi (kg) | 1038 | 3000 | 4437 | 6500 | 7850 | |
| Siga/samfuri | X(S) N-75×32 | X(S) N-95×32 | X(S) N-110×30 | X(S) N-150×30 | X(S) N-200×30 | |
| Jimlar girma | 175 | 215 | 250 | 325 | 440 | |
| Ƙarar aiki | 75 | 95 | 110 | 150 | 200 | |
| Ƙarfin mota | 110 | 132 | 185 | 220 | 280 | |
| Karfin motsin motsi | 4.0 | 5.5 | 5.5 | 11 | 11 | |
| Kwangilar karkata (°) | 140 | 130 | 140 | 140 | 140 | |
| Gudun rotor (r/min) | 32/26 | 32/26 | 30/24.5 | 30/24.5 | 30/24.5 | |
| Matsi na matsa lamba | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | |
| Ƙarfin matsewar iska (m/min) | ≥1.3 | ≥1.5 | ≥1.6 | ≥2.0 | ≥2.0 | |
| Matsin ruwan sanyaya don roba (MPa) | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | |
| Matsin tururi don filastik (MPa) | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | |
| Girman (mm) | Tsawon | 3760 | 3860 | 4075 | 4200 | 4520 |
| Nisa | 2280 | 2320 | 2712 | 3300 | 3400 | |
| Tsayi | 3115 | 3320 | 3580 | 3900 | 4215 | |
| Nauyi (kg) | 10230 | 11800 | 14200 | 19500 | 22500 | |
Aikace-aikace:
Ana amfani da ƙwanƙwasa roba don haɗawa ko haɗa roba da robobi.Mai haɗawa ya ƙunshi rotors masu siffa mai siffa mai jujjuyawar jujjuyawar da aka lulluɓe a cikin ɓangarori na gidaje masu siliki.Mai iya yin rotors don kewayawa na dumama ko sanyaya.
Yana da m zane, ci-gaba tsari, high masana'antu ingancin, abin dogara aiki da kuma dogon sabis rayuwa.Ya dace da masana'antun taya da na roba da ke rufe kayan aiki da masana'antar kebul zuwa filastik, babban tsari da hadawa na ƙarshe, musamman don haɗuwa da fili na taya radial.
Cikakken Bayani:
1. Watsawa Kneader Machine na'ura mai juyi yana da mai rufi da wuya chromium gami, quenching jiyya da goge, (12-15 yadudduka).
2. Watsawa Kneader Machine hadawa dakin kunshi W-siffar jiki welded tare da high quality karfe faranti da guda biyu na gefe faranti.Daki, rotors da piston ram duk suna da jaketed tsarin don shigar da tururi, mai da ruwa don dumama da sanyaya don dacewa da buƙatu daban-daban don aiwatar da hadawa da filastik.
3.Dispersion Kneader Machine Motor, reducer rungumi dabi'ar taurare hakori surface kaya, wanda yana da sosai low amo da kuma iya ajiye 20% lantarki ko iko da kuma yana da dogon sabis rayuwa - 20 shekaru.
4. PLC kula da tsarin rungumi dabi'ar Mitsubishi ko Omron.Abubuwan lantarki suna ɗaukar ABB ko Alamar Amurka.
5. Na'urar karkatar da matsa lamba na hydraulic tare da amfani da kayan fitarwa da sauri da kusurwar 140 tilt.
6. An rufe dakin ido da farantin farantin-fadin Labyrinth da ƙarshen Rotor Edatelts Contacts nau'in rashin lubricating tare da tsarin da ba na bazara.
7. Ana sarrafa zafin jiki da daidaitawa ta hanyar tsarin kula da wutar lantarki.
8. Tsarin pneumatic zai iya kare motar daga lalacewa saboda overloading na ɗakin.
9. Dukkanin injunan mu suna garanti na shekara ɗaya zuwa uku.Muna ba da mafi kyawun sabis na tallace-tallace kamar kan horo na layi, taimakon fasaha, ƙaddamarwa da kulawa na shekara-shekara.
