Oke
| Parameter/ihe nlereanya | X(S) N-3 | X(S) N-10×32 | X(S) N-20×32 | X(S) N-35×32 | X(S) N-55×32 | |
| Mkpokọta olu | 8 | 25 | 45 | 80 | 125 | |
| Olu na-arụ ọrụ | 3 | 10 | 20 | 35 | 55 | |
| Ike moto | 7.5 | 18.5 | 37 | 55 | 75 | |
| Ike moto na-atụgharị | 0.55 | 1.5 | 1.5 | 2.2 | 2.2 | |
| Akụkụ ntụgharị (°) | 140 | 140 | 140 | 140 | 140 | |
| Ọsọ rotor (r/min) | 32/24.5 | 32/25 | 32/26.5 | 32/24.5 | 32/26 | |
| Nrụgide nke ikuku abịakọrọ | 0.7-0.9 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | |
| Ike ikuku ekpokọtara (m/min) | ≥0.3 | ≥0.5 | ≥0.7 | ≥0.9 | ≥1.0 | |
| Nrụgide nke mmiri jụrụ oyi maka rọba (MPa) | 0.2-0.4 | 0.2-0.4 | 0.2-0.4 | 0.3-0.4 | 0.3-0.4 | |
| Nrụgide nke uzuoku maka plastik (MPa) | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | |
| Nha (mm) | Ogologo | 1670 | 2380 | 2355 | 3200 | 3360 |
| Obosara | 834 | 1353 | 1750 | 1900 | 1950 | |
| Ogologo | 1850 | 2113 | 2435 | 2950 | 3050 | |
| Ibu (kg) | 1038 | 3000 | 4437 | 6500 | 7850 | |
| Parameter/ihe nlereanya | X(S) N-75×32 | X(S) N-95×32 | X(S) N-110×30 | X(S) N-150×30 | X(S) N-200×30 | |
| Mkpokọta olu | 175 | 215 | 250 | 325 | 440 | |
| Olu na-arụ ọrụ | 75 | 95 | 110 | 150 | 200 | |
| Ike moto | 110 | 132 | 185 | 220 | 280 | |
| Ike moto na-atụgharị | 4.0 | 5.5 | 5.5 | 11 | 11 | |
| Akụkụ ntụgharị (°) | 140 | 130 | 140 | 140 | 140 | |
| Ọsọ rotor (r/min) | 32/26 | 32/26 | 30/24.5 | 30/24.5 | 30/24.5 | |
| Nrụgide nke ikuku abịakọrọ | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | |
| Ike ikuku ekpokọtara (m/min) | ≥1.3 | ≥1.5 | ≥1.6 | ≥2.0 | ≥2.0 | |
| Nrụgide nke mmiri jụrụ oyi maka rọba (MPa) | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | |
| Nrụgide nke uzuoku maka plastik (MPa) | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | |
| Nha (mm) | Ogologo | 3760 | 3860 | 4075 | 4200 | 4520 |
| Obosara | 2280 | 2320 | 2712 | 3300 | 3400 | |
| Ogologo | 3115 | 3320 | 3580 | 3900 | 4215 | |
| Ibu (kg) | 10230 | 11800 | 14200 | 19500 | 22500 | |
Ngwa:
A na-eji kneader ụlọ nyocha maka ịgwakọta ma ọ bụ jikọta rọba na rọba.Ngwakọta ahụ nwere rotors abụọ na-agbagharị agbagharị agbadoro n'ime akụkụ nke ụlọ cylindrical.Enwere ike ịgbanye rotors maka mgbasa nke kpo oku ma ọ bụ jụrụ oyi.
Ọ nwere ezi uche imewe, elu Ọdịdị, elu n'ichepụta àgwà, a pụrụ ịdabere na ọrụ na ogologo ndụ ọrụ.Ọ dabara maka taya na ụlọ ọrụ rọba na-ekpuchi ihe na ụlọ ọrụ USB ka ọ bụrụ plasticization, master-batch na ngwakọta ikpeazụ, ọkachasị maka ịgwakọta ogige taya radial.
Nkọwa ngwaahịa:
1. Dispersion Kneader Machine rotor na-ekpuchi ya na chromium alloy siri ike, na-emenyụ ọgwụgwọ ma na-egbuke egbuke, (12-15 layers).
2. Dispersion Kneader Machine mixing chamber mejupụtara W-ụdị ahụ welded na elu àgwà ígwè efere na abụọ iberibe n'akụkụ efere.Ime ụlọ, rotors na piston ram bụ ihe mkpuchi mkpuchi maka ntinye nke uzuoku, mmanụ na mmiri maka ikpo ọkụ na jụrụ oyi iji kwado ihe dị iche iche achọrọ maka usoro ịgwakọta na plastik.
3.Dispersion Kneader Machine Motor, reducer adopts hardened tooth surface gear, nke nwere oke mkpọtụ ma nwee ike ịchekwa 20% ọkụ eletrik ma ọ bụ ike ma nwee ogologo ndụ ọrụ - afọ 20.
4. PLC akara usoro adopts Mitsubishi ma ọ bụ Omron.Akụkụ eletrik na-ewere ABB ma ọ bụ akara US.
5. Hydraulic mgbali tilting usoro na uru nke ngwa ngwa ngwa ngwa na 140 tilt angle.
6. Chamber bụ nke ọma mechie site arc-ekara-efere-groove labyrinth ụdị Ọdịdị na aro ọgwụgwụ nke rotor adopts kọntaktị ụdị na-abụghị lubricating na mmiri tightening Ọdịdị.
7. A na-achịkwa okpomọkụ ma gbanwee site na usoro nchịkwa eletrik.
8. Usoro pneumatic nwere ike ichebe moto ahụ ka ọ ghara imebi ya n'ihi oke ibu nke ụlọ.
9. Igwe anyị niile bụ akwụkwọ ikike otu afọ na atọ.Anyị na-enye ọrụ kacha mma mgbe ire ere dị ka ọzụzụ ahịrị, enyemaka teknụzụ, inye ọrụ na mmezi kwa afọ.
